Posts Tagged ‘start menu’
In Windows Vista, many users have reported the recycle bin as missing in action. When I first heard this problem surfacing among users, I tried to figure out how it could have happened, and ended up in a dilemma of my own. For the first time in the history of windows, it seems the Recycle Bin is actually armed with a delete button – which when clicked, causes the Recycle Bin to actually “disappear” from the system. Some users do this by accident, while meaning to click the empty recycle bin option above it. Others just click delete to see what happens, not expecting that the Recycle Bin could actually be removed. If this has happened to you, no need to fret – recovering the Recycle Bin is only a couple clicks away.
In truth, the Recycle Bin cannot actually be removed from the computer. The icon has been removed from your desktop, and access within Windows Explorer has been stopped. To solve this problem, go to the start menu and click on the control panel. From there, click appearance and personalization, and select the personalization icon. In this window, there should be an option to change desktop icons on the left side. After clicking this option, check the recycle bin and click OK to restore your Recycle Bin. If you view your desktop, the Recycle Bin should have reappeared, and is ready for use.
In earlier versions of Windows, the Event Viewer has been a very simple program which recorded events which took place on your computer. In these versions, only significant occurrences which were determined as important by the computer would even be logged. While this was still useful, many administrators have desired a more detailed system which would allow them to troubleshoot difficult problems and errors. In Windows Vista, the Event Viewer is able to do just that, and a little more.
To start off, let’s figure out just how we can open and access the Vista Event Viewer. First, access the start menu by means of the Windows Vista orb. You must then click on control panel. After the control panel is visible, find and click the administrative tools icon. From here it’s pretty much self explanatory – click Event Viewer.
New features in Vista’s Event Viewer include:
- Ability to view events from multiple logs simultaneously. In the Windows Vista version, administrators have the ability to browse events via filters – which search for similar events across multiple logs. Within this customized view, it becomes much easier to troubleshoot for viruses, and other problems which may occur on your computer. For example, on a multiple user computer, a spyware program may open Internet Explorer at 7 in the morning without being called up by the user. Using Create Custom View…, an administrator can calibrate a filter to view the application, security, and system log during that hour. By seeing this, you could locate a spyware .dll file which was programmed to open IE at 7.
- Set tasks to act in response to certain events. This feature allows an administrator to plug in automated responses to certain events. If, for example, your computer often wakes up during the night to install updates, the Event Viewer could be used to carry out a task which turned the computer off afterwards. This feature must be used in accordance with the Task Scheduler, another one of the Administrative Tools.
- New Log Categories. In the Vista edition, the Event Viewer consists of two new categories: Setup and Forwarded Events. Both of these logs are very functional, allowing for more in-depth analysis when troubleshooting viruses, spyware, and hackers. The setup log is used to record activity which occurs during the setup of new programs and applications. This information could be useful when checking to see if an application was installed by the user, and of It has spyware or other programs attached to it. The forwarded events log records what happens during server activity. This log records the ID of of other computers, and the events which occur on these computers.
All in all, the Windows Vista Event Viewer is a vital container of everything which happens on your computer – the ins and outs. Each individual logfile contains admin, operational, analytic, and debug log sections. Using the features in this program, administrators will find it easier to troubleshoot their computer systems.
Microsoft Baseline Security Analyzer 2.1 or MSBA 2.1 is a must-have utility for those concerned with the safety of their computer. It’s a great tool for those with networks or small businesses, because it also allows you to scan for vulnerabilities across the computers on your network. Basically what it does is detect common security misconfigurations, missing security updates, and any options that have been set that may be of interest, which I will explain later on.
Once you download the program, it is actually really straight-forward and easy to use
But if you would like to learn about how to scan other computers in your network or how to access the security report generated, feel free to continue reading!
a
Evaluating a Security Report:
The Security Report is very detailed and effective in presenting information. Let’s take a look at how to use the information to imrpove your computer’s security. The program even tells you how to fix the problems so it shouldn’t be very difficult. Below I will just list my interpretation of the issues listed:
User Accounts (Admin / Guest):
Do not overlook this detail, and make sure you are aware of the number of Admin accounts on your computer. If there are more than you know about, this may suggest somebody is accessing your computer without you knowing it. As for the Guest account, you may disable it if you are the only one using the computer. I leave it enabled so my family members can use my computer when I’m not there without accessing my files.
Automatic Updates:
If you want to be protected from the latest risks, this should be enabled. However, I do not have this enabled because I have had issues with my Sound Card and Video Card when installing the drivers recommended through Windows Update. Also, Vista insists their drivers are newer even though I am using beta video card drivers. To prevent them from automatically installing their drivers over mine, I leave automatic installation disabled and just respond immediately when I see the bubble in the right corner alerting me to update. I don’t suggest enabling auto-install if you’ve had driver issues with your hardware.
Windows Firewall:
If Windows Firewall is not enabled on all connections, click on “How to Correct This.” If the problem still persists, go to your Firewall settings, click on the Advanced Tab, and ensure all connections are checked.
As for the other categories, they are pretty straight forward. If you have any questions feel free to ask me in the forum.
How to Scan a Network of Computers:
First you need to determine the “Domain Name” or the IP Range you want to scan. If you’re a network administrator, you should already know the this type of information or have your own method of doing this, so you won’t need to read the rest of the guide.
If you do know the “Domain Name” that’s great! But if you don’t know, I’m only going to explain how to find the IP range because I’ve had a lot of problems with Windows Vista and Network Domain Names.
What’s an IP address?
In case you don’t know what an IP is, it’s an address assigned to every computer so that it can be identified.
Moving on…
First ensure that all computers are on, and logged onto their administrator account. Now before we do anything drastic, your list of IPs probably start at 192.168.1.100 and end at 192.168.1.126
First, put that in and see if it works. If it works, then you’re good to go!
If it doesn’t, you’re going to have to actually log into your router and find out.
First, open the Start Menu, type cmd in the Search bar, and press Enter. Once Command Prompt is open, type
ipconfig
Look for default gateway and write it down. Then open your internet browser, and type it in. This will take you to your router settings.
The router I’m using is a Linksys WRT54G v8. You might have a different kind of router or firmware, but the steps should be very similar.
First, look for a Status button or tab. Next, you want to click on LAN or DHCP Clients, or a button that will display all the computers connected to the network.
You should get something that looks like this:
Now you know what the IP range is. Simply take the lowest numbered IP and the largest one, and input it into the IP range boxes and you should be good to go.
Using the task scheduler to wake up your computer
For various reasons, it could be quite practical to incorporate an automatic startup into your computer’s daily routine. My old Pentium IV takes about 2 minutes just to boot up and load everything altogether for the computer to become usable. (You should be using the hibernate feature anyway.) Especially since Vista is more demanding, it probably takes quite a while for those old computer to startup. It could be quite troublesome when you have to use your computer for an emergency, only to realize that it takes your computer too long to load… Even more, the setup process is simple and straightforward, involving only a few steps. Before we continue any further, this feature requires you to have a login password to your account. This is a security measure to prevent your computer from being exploited when it is turned off.
What is the Task Scheduler?
If you have worked with Windows at any level, you are most probably aware of the Task Scheduler function. Most often, Windows users fail to make use of this utility because it’s functionality is often underestimated. In the Vista and XP version, this preinstalled utility is able to regulate and initiate all tasks which run on your system. I In Vista, this program is even more advanced because it can respond to other detailed triggering actions which occur on your system. The Vista Task Scheduler can even respond to actions which occur on other computers among your network. If you have time, I recommend playing around with it.
Opening the Task Scheduler
Opening the Task Scheduler can be done in multiple ways, but the easiest way would probably be to type Task Scheduler into the start menu search bar and pressing enter.
Scheduling the Vista Start Up
To start off, you need to open the New Task window. Click on Actions at the top and then click on Create Task from the dropdown menu. Now that you have opened the window, type a name and description for your startup task. Then near the bottom, make sure Run whether user is logged on or not is selected.
In the Triggers tab, you must now choose the time at which the computer will startup. Click on the New… button, and be sure that On a schedule is selected in the dropdown. Choose the time at which you wish for startup to begin. Next, choose the frequency which will be used, whether it be daily, weekly monthly, or on one single occasion.
In the actions pane, you must choose an action which will occur at startup. This can be an opening of a file/program, or a simple welcome message display. If no particular program/file need be opened, choose the message option and specify the welcome message which should be utilized. (For GTD adapters, you can have it open your web browser so you can view your Google Calendar right away.) In the conditions tab, make sure that wake this computer to run this task is checked. If no additional settings are necessary, click OK and proceed to the main window. If you ever need to edit this task, you can view it the Active Tasks portion of the Task Scheduler.
I’ll be talking a bit more about different task scheduler tweaks you can use this month.
In Windows XP, a shortcut was simply a button that allowed you to access a program without having to go all the way to its original directory. However, Windows Vista provides the option of using your keyboard as shortcuts to opening your programs. You can now use 1, 2, or 3 simple keystrokes to open one of your programs.
Read the rest of this entry »
Because programs such as Partition Magic don’t work on Windows Vista, some of you may be wondering how to resize partitions without losing any data. The good news is that you probably won’t be needing those programs because Windows Vista can manage your partition resizing.
Read the rest of this entry »
By default, Windows Vista is the OS you will boot up in if you decide not to push anything at the boot-selection screen. However, this setting is changeable for those who would much rather have their earlier version of Windows become the default OS. You might be wondering why someone would want to do that? For instance, my brother is a very hardcore gamer but unfortunately, there is no driver support for my video card on Vista. Because he uses this computer more often than I do, the default OS on this particular PC is set to XP.
Now, let’s modify the default OS to start at bootup. First, go to Start Menu, right click on my computer, and choose properties.
Read the rest of this entry »
I’m sure by now, you’ve seen this window more than a few times. For some, maybe a few too many times.Every time a change is made to your computer that could potentially affect your PC’s system or settings such as (installing new programs, running scripts, running .exe files, etc); this window is determined to pop up each time and ask for your permission to allow the change to be made.
If you do not want to be harassed by Vista for at least 5 years, you can easily turn User Account Control (UAC) off.
Read the rest of this entry »
Remember the convenient run feature in the Start Menu that let you do everything on XP without having to look for it? It even saved the history of what you typed in. So is the run feature gone for good on Vista? Not quite. Read the rest of this entry »
Update: A better fix has been found! Click here to be directed to that post.
This post contains the temporary fix to the SoundMAX sound problems.
Lately there has been a case of sound cutting off spontaneously on Vista. This problem concerns users who are using the SoundMAX Integrated Audio Driver.
Symptoms include:
- Progress bars freezing in music and movies
- Sound being disabled after a song
- Sound not working again after pausing a song
- Random occurances of sound disabling
Read the rest of this entry »
